Software for EVENTS and VIRTUAL PRODUCTION
_edited.jpg)
Only for MacOS
Only for iOS
Move Cue / Magic Event - old name) is a professional macOS app for real-time gesture and pose recognition in live production.
Use up to 4 cameras, map recognition events to FreeD, OSC, and DMX (Art-Net / sACN) outputs, and trigger slot-based audio playback without custom coding.
Built for stage, broadcast, and virtual production workflows, Move Cue Pro offers:
-
Real-time hand and body pose tracking with low-latency response
-
Up to 20 gesture slots with per-slot thresholds and anti-false filtering
-
Flexible audio triggers per slot (on recognition, hold behavior, after-finish options)
-
Slot playback control modes (play all slots or enforce single-slot playback)
-
Per-camera ROI controls and visual overlays for stable detection
-
Multi-destination UDP output for FreeD / OSC / DMX pipelines
-
Project-based workflow with save/load, reference capture, and quick recall
From interactive performances to automated cues, Move Cue Pro turns movement into reliable control and sound events for live shows.
Turn gestures into show control. Move Cue tracks body pose and gestures from your camera and sends OSC, FreeD & DMX to lights, UE, Unity, TouchDesigner Resolume in real time.
- Ready for UE FreeD live Link
RECOGNITION MODES
• One hand
• Two hands
• Body pose
• Pose + one hand
• Pose + two hands
Per slot: sensitivity threshold, send mode (continuous, pause, hold), and output rate.
Move Cue turns body gestures and poses into professional live show control from your iPhone or iPad.
The app recognizes hands and body movement in real time and sends commands over your local network via OSC, FreeD, and DMX (Art-Net and sACN). No cloud, no server delay - everything runs on your device.
WHO IT'S FOR
• Broadcast directors and camera operators
• Lighting designers and console programmers
• VJs, installation artists, and performers
• Technical directors for concerts and corporate shows
Configure gesture slots - up to 20 different triggers.
Capture a reference frame for each gesture or pose.
PROTOCOLS: FreeD, OSC, DMX Art-Net and sACN. Per-slot channel table: universe, channel, ON/OFF values, 8/16-bit resolution, fade. Channel conflict detection.
• ROI - region of interest for precise recognition
• Live preview with skeleton overlay
• External USB camera support on Mac
• Anti-false-trigger: hysteresis and ON/OFF timing
• FPS Boost to reduce device load
• Keep screen awake during shows
External FreeD motion tracker with your iPhone or iPad.
Stream real-time position and rotation over UDP in industry-standard FreeD format to your virtual production pipeline.
Built for virtual production Connect to any FreeD-compatible receiver on your local network. Enter the IP and port, tap Start, and tracking data
• World tracking for X/Y/Z position (centimeters on screen)
• CoreMotion for yaw, pitch, and roll
• Optional LiDAR on Pro devices for better stability
• Set Zero, offsets, smoothing, and axis presets (FreeD, Unreal, Unity, Custom)
Professional control • Per-axis UDP output (enable/disable what you send)
• Custom axis remap including Pitch, Yaw, Roll
• Live diagnostics with decoded packet values
• Test Mode for validation without sensors
Only for iOS
Only for MacOS
FreeD Trigger for DMX bridges broadcast camera tracking and your lighting network. Listen to FreeD Type packets over UDP, define position and orientation rules, and fire DMX output when your virtual camera hits the mark - ideal for automated cues, follow spots, and integrated live shows.
HOW IT WORKS
• Receive FreeD tracking data on your local network
• Monitor live X, Y, Z, roll, pitch, and yaw with clear signal status
• Create trigger slots with flexible conditions: less, equal, greater, range, and more
• Assign unlimited DMX actions per slot with smooth fades
• Output via Art-Net or sACN, with configurable universe, channels, and frame rate
• Edge-based triggering with hold time to reduce jitter on noisy tracking
• Built-in conflict detection so active slots do not fight for the same DMX channels
DMX FOR PRODUCTION
• 8-bit and 16-bit (coarse + fine) channel control
• Per-action fade times and target values
• Test On / Test Off and blackout for safe rehearsal
• Unicast to specific nodes or Broadcast mode for wide delivery (Pro)
• Up to five target IP addresses for unicast destinations
PROJECTS & WORKFLOW
• Save and load show files (.freedmxproj)
• Import and export projects between iPhone, iPad, and Mac
• Activity log for troubleshooting on site
• Tolerance and minimum hold time tuning for your tracking source
Kit Loop App is the packing and return app for production gear. Built for shoot trips - from solo videographers to full crews who need every kit accounted for before call time and after wrap.
Film and video shoots move fast. Lights, cameras, batteries, lenses, and cables change hands constantly - and something always risks being left behind. KitLoop helps you build reusable kits, label items with QR codes, pack for the trip, and verify what returned. Share kits and trip lists with the team so everyone works from the same inventory, whether you’re running a one-person shoot or coordinating a large production.
Pack, track, and return production gear on every shoot trip - for videographers and crews that can’t afford to lose equipment.
Real Time Gesture and Pose recognition system for activating event triggers or object animation (movement).
RECOGNITION MODES
• One hand
• Two hands
• Body pose
• Pose + one hand
• Pose + two hands
ROI — region of interest for precise recognition
Live preview with skeleton overlay
Anti-false-trigger: hysteresis and ON/OFF timing
FPS Boost to reduce device load
The app recognizes hands and body movement in real time and sends commands over your local network. No cloud, no server delay - everything runs on your device.
- Supported protocols:
FreeD, OSC, DMX (ArtNet/sACN)
- Ready for UE FreeD live Link
- Analyzes 1, 2 or 3 cameras online in real time
Blueprints for working with Magic Event
- Redirect the DMX signal
- Activate the audio file (feature available in the new version)
- Combine trigger activation rules
- Build your own logic
